Tesla Shinyo 213W TC Vape Kit
The Tesla Shinyo 213W TC Vape Kit, with the zinc alloy shell, using a PVD vacuum plating process, good feeling to hold in the palm. the Tesla Vape Mod adopts a 2.0 inch OLED display and the HD user in..
- Product Code: M00000294
- Availability: In Stock
Available Options
The Tesla Shinyo 213W TC Vape Kit, with the zinc alloy shell, using a PVD vacuum plating process, good feeling to hold in the palm. the Tesla Vape Mod adopts a 2.0 inch OLED display and the HD user interface, will show you the vaping data clearly, with the ergonomically firing button, Up and Down buttons, easy to use. the Tesla Shinyo Mod powered by dual high-rate 18650 batteries and max output 213W, with the magnetically designed battery panel, easy to replace the batteries or charge via the micro USB port. the Shinyo Mod supports resistance as low as 0.1ohm, various working modes and taste modes switchable, supports the Nickel 200, Titanium and SS316L heating materials and TCR function under TC Mode. the Tesla Tind Tank comes with the bubble glass tube and enlarge the capacity to 4.5ml, with convenient top e-juice refill and bottom airflow adjustable designs, no worry about leaking and can adjust the airflow to your preference simply. the Tesla Vape Kits come with the 0.18ohm Mesh Coils, with the large heating area, will heat your favorite e-juice evenly and quickly, will deliver the large cloud of vapor and great flavor.
Tesla Shinyo 213W Box Mod Features:
- Size: 90*50*29mm
- Colors: Blue, Green, Gun Metal, Stainless Steel
- Powered By Dual High-Rate 18650 Batteries(Sold Separately)
- Output Wattage: 5-213W
- Output Voltage: 1.0-7.5V
- Input Voltage: 6.4-8.4V
- Input Current: 40A
- Taste Modes: Hard, Soft, Norm, User
- Working Modes: Kanthal, TC( NI, TI, SS316L, TCR)
- Memory Mode: M1, M2, M3
- Resistance Range: 0.1-3.0ohm
- 2.0 Inch OLED Display
- USB Charging: 5V / 1.5A
- Micro USB Port For Charging
- Short Circuit Protection
- 10S Cut-Off
- Low Voltage Protection
- Over-Current Protection
- Charging Protection
- Over-Temperature Protection
- Firmware Upgradeable
Tesla Tind Tank Features:
- Material: Stainless Steel + PC
- Size: 51*28mm
- 4.5ML E-Juice Capacity
- Coil:
- 0.18ohm TS-X3 Mesh Coil, 70-80W
- Bottom Airflow Adjustable Design
- Convenient Top E-Juice Refill Design
- Anti-Scalding Drip Tip
Includes:
1*Telsa Shinyo Box Mod
1*Tind Tank
1*TS-X3 Mesh Coil 0.18ohm
1*Bulb Glass Tube
2*Silicone Rings
1*Micro USB Cable
1*User Manual
Note: please ensure you have basic knowledge on how to properly use it.
1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.
2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage to the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
3) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.